Big Blue Red Bike Lift Bike Grab Tommy Jack Strong Arm Bikelift Gator Straps Tyre Downs Tyre Downs Tyre Downs Tyre Downs

Mount Options

Some mount combinations below can be mixed and matched to suit a variety of bikes and present a saving on buying the full mount sets.

Please contact us and we can advise.

Beam Mounts

Beam Mounts for the Big Blue Bike Lift and Original Red

Beam Mounts are suited to any road going bike that has a duplex frame (twin chassis rails) slung below either side of the engine, in particular Harley Davidson's, the wide variety of Japanese Custom Bikes and many of the Classics which are still in regular use.

Beam Mounting brackets are designed to take full advantage of the wide-based twin chassis frame layout to offer you a rock-solid method of raising these special bikes.

 

View product

$115.00

Footpeg Mount

Footpeg Mounts for the Big Blue Bike Lift and Original Red.
These mounts are the swiss army knife of mounts they were designed to lift virtually all motorcycles regardless of age. Whether its a v-twin, parallel twin, triple, or four, these mounts work!

Available in standard and heavy duty types.

View product

$115.00

Frame Mounts

These mountings have been designed for applications where it is not possible to lift the bike by employing the normal 'beams' method in pairs, due to obstructions or uneven surfaces such as the exhaust system or crankcase falling below the frame line of the bike.

 

View product

$70.00

Goldwing 1800 Mounts

Mount Set for Goldwing 1800.

For Goldwing 1500 1200 etc use beam mounts

View product

$115.00

Multimounts

Multi Mounts for the Original Red Only.

When using Multi-Mounts to lift v-twin engined bikes you may choose to opt for our V-Twin variant which uses an alternative top element for the front lifting bracket; this enables you to support the bike via the cylinder barrel as opposed to cradling the collector pipes.

Please Note: one set of mounts of your choice are provided free when purchasing "The Big Blue" or "Original Red Bike Lift"
or as an alternative or mix and match basis purchase below.

View product

$115.00

Red and Blue Lift Locks

A Shutter type lock is avaialbe to lock your lifting arm in the fully raised position.  This prevents any unauthorised lowering of the lifting arm.

Can be an theft deterrent if your lift and bike are in unsecurred area's.

View product

$26.00

Rocket 3 Mounts

Triumph Rocket 3 Mounts

Unable to break the PDF to post a copy here, if you would like a copy of the instructions, please email your request to 

russ@Oneup.com.au

 

View product

$115.00

Triumph Thunderbird Mounts

Mounts for Triumph Thunderbird 1600 and 1700

 

View product

$115.00

V Twin Front Mount

This mount adapts to the front mount section of the footpeg mount set.  It is designed to lift by the front cyclinder head in the vicinity of the exhaust port.

View product

$40.00

V-Twin Mounts

V-Twin/Sports/Super Bike Mounts for the Original Red.

This mounting has been designed specifically for use with V-Twins Complete Bracket Set.

 

View product

$115.00

Valkyrie Mount

Please read the main instructions before commencing, then refer to this supplement.

This mounting has been designed specifically for use with the Valkyrie and must be used in conjunction with the Beam Mounting kit.

With the bike in it's resting position on the side stand take the mounting and position it under the frame rail situated between the swing arm and rear of the gearbox casing.

The mounting is sized to fit between the stand bracket casting and the R/H frame rail.

View product

$115.00

Wheel Mounts

Wheel Mounts for the *Big Blue Bike Lift and Original Red

The two 'hoop' shaped Wheel Mounting brackets are able to slide in and out of the main lifting arm, thus allowing you to individually adjust each bracket to achieve the correct fitment.

*"Eazy Rizer Big Blue" is designed for chassis mounts wheel mounts can only be used on a mixed and match basis.

View product

$115.00